I have run up against a wiring problem. I need to run the wires for the landing light through the snap bushing but the wing is closed so I no longer have access to each rib. I pulled one of the nav light wires back (outboard to inboard) with safety wire attached to pull the new wires forward, but there is no way to get the 2 wires I need through the snap bushing. I was thinking that I could run the wires through the forward lightening hole with stand-offs but am concerned about drilling a rib. Can I run the wires through with F-1204-Y just sitting in the forward lightening hole. I only have access to a couple of ribs in the inboard side
and only 2 outboard ribs.
Any thoughts would be appreciated
Thanks
Donnie Mac
and only 2 outboard ribs.
Any thoughts would be appreciated
Thanks
Donnie Mac