I am interested in installing a marine-style digital media receiver like this:
(Example shown is a Clarion GR10BT)
Or, as an alternative, I would like to install a bluetooth audio adapter, like this:
(Example shown is a JL Audio MBT-RX)
I have the G3X system in an RV-12.
Can I simply wire the left/right audio connections directly into the aux music input connections (pins 2 & 20 of the Fuselage wiring harness)? In the case of the digital media receiver, they are almost all amplified - will this be a problem? In the case of the bluetooth audio receiver, is it simply a manner of cutting the RCA connectors and wiring them directly into the aux music wires?
I found this in the GTR 200 Installation Manual, but I don't know what the numbers mean, nor do I know what "LO" is:
Thanks in advance for the advice!
(Example shown is a Clarion GR10BT)
Or, as an alternative, I would like to install a bluetooth audio adapter, like this:
(Example shown is a JL Audio MBT-RX)
I have the G3X system in an RV-12.
Can I simply wire the left/right audio connections directly into the aux music input connections (pins 2 & 20 of the Fuselage wiring harness)? In the case of the digital media receiver, they are almost all amplified - will this be a problem? In the case of the bluetooth audio receiver, is it simply a manner of cutting the RCA connectors and wiring them directly into the aux music wires?
I found this in the GTR 200 Installation Manual, but I don't know what the numbers mean, nor do I know what "LO" is:
Thanks in advance for the advice!
Last edited: