G3X Lighting Bus Calibration Table (Cockpit Lighting)

supik said:

I don't have the G3X yet, but I am planing on the rheostats in the cockpit for various dimming functions.

Can I use 2 different Calibration Tables for the one and same dimmer (10k rheostat) to operate 2 lighting buses with a different calibration curve?
---------------------
Example:

1 dimmer controls lighting of:

-DC reference bus 1 with 2 calibration points

and at the same time:
-PWM bus 1 with 4 calibration points
----------------------
Thanks!

Click to expand...

g3xpert said:

Hello Igor,

If you are planning on installing a GAD 27, a single lighting bus control (potentiometer) can be assigned through software configuration to control up to 6 lighting buses (3 DC, 3 PWM), each with a separate calibration curve.

Thanks,
Steve

Click to expand...