Tail components are essentially finished except for fiberglass tips. Mounting components in elevator for electric trim. Internal components primed.
Wings are currently mounted on jigs. Ribs riveted to front and rear spars. Outboard leading edge skins riveted in place. Landing light openings complete. Internal components primed.
Heated pitot tube (not installed)
Duckworks dual landing light kits
Capacitance fuel sending units with flop tube
Fuel tank ribs started
All necessary tools included plus pneumatic rivet squeezer.
Workmanship is excellent. Inspected by tech counselor Tom Berge. Stored in dry environment with no signs of corrosion.
Additional photos upon request.
Kit is located in Stillwater, MN. $8000 or OBO (kit and tools). Contact Doug Weiler at email@example.com
by Doug Weiler
, on Flickr