Follow the plans exactly in regards to the washer callouts on the axle. They create a gap for the slot in the bracket to slide in. After it is slid into place, the 3/8" bolt at the front is installed and tightened. There has to be a hole in the fairing to access the 3/8" bolt in the finished state.
RV-7A: Flying since April 15, 2012. 800 hrs
YIO-360-M1B, mags, CS, GRT EX and WS H1s & A/P, Navworx
Unpainted, polished....kinda'... Eyeballin' vinyl really hard.