Michael Burbidge
Well Known Member
I followed Vans directions in making this lower baffle tie. Does it look acceptable?
Also do you know if the steel rods that are used in the hinges for the cowl are the same stuff that is used for the baffle ties. I messed up my first attempt and I have some of the rod left over from the cowl. I measured it with my calipers and it is exactly the same thickness.
Thanks,
Michael-
Also do you know if the steel rods that are used in the hinges for the cowl are the same stuff that is used for the baffle ties. I messed up my first attempt and I have some of the rod left over from the cowl. I measured it with my calipers and it is exactly the same thickness.
Thanks,
Michael-