Thanks Ed. I can?t get access to my 3 at the moment so I was hoping someone had done this before. There isn?t a great deal of space so a knee board may have to be the solution.
Mine is on a Ram ball mount to the right of the comm in the picture posted above. Not an iPad, but a ifly about the same size. Works well in that position for me in my-3.
Mine is on a Ram ball mount to the right of the comm in the picture posted above. Not an iPad, but a ifly about the same size. Works well in that position for me in my-3.
Second for Ram ball mount. Mine is in a biplane but the panel is about the same size. Ball can be off to the side and using a long mount will place the I Pad where you want. I mounted my ball with a couple of #10 Rivnuts.
Id mount it in front of a vent to cool it off. When the Ipads (all of them) heat up they can tend to be hard to see, even with the brightness turned up completely.