VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #31  
Old 02-08-2018, 09:13 AM
flynwest flynwest is offline
 
Join Date: May 2008
Location: Sacramento
Posts: 336
Default Angle Valve Covers

OK Ross
When do the Angle Valve covers start production?
__________________
Horse Power is good, more is better and
Too Much is Just Right
RV 8 Super charged Barrett IO-390
Dues paid 2018
Dan "Nordo" West
Reply With Quote
  #32  
Old 02-08-2018, 09:53 AM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 2,806
Default I'm in.

I'm in for the next production run.
Set of four for Lycoming IO360M1B
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #33  
Old 02-08-2018, 01:45 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 4,194
Default

Quote:
Originally Posted by flynwest View Post
OK Ross
When do the Angle Valve covers start production?
They are going into CAD next week but after measuring a bunch of heads for material around the bolts and casting variations, we were not confident we could make them seal reliably with an O-ring. There just isn't the same room as on the PV heads. So we will still use flat gaskets on these but we're looking at our own solution to this area. I can't talk about that part until we test prototypes though.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, Marcotte M-300, IVO, RV6A C-GVZX flying from CYBW since 2003- 418.1 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi.htm


Reply With Quote
  #34  
Old 02-08-2018, 01:46 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 4,194
Default

Quote:
Originally Posted by wirejock View Post
I'm in for the next production run.
Set of four for Lycoming IO360M1B
Thanks Larry. I'll PM you.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, Marcotte M-300, IVO, RV6A C-GVZX flying from CYBW since 2003- 418.1 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi.htm


Reply With Quote
  #35  
Old Yesterday, 06:13 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 4,194
Default

Ok gents. I picked up all the VCs from the first anodizing and etching batch this afternoon. I'll be sending them out tomorrow.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, Marcotte M-300, IVO, RV6A C-GVZX flying from CYBW since 2003- 418.1 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi.htm


Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:51 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.