flickroll
Well Known Member
I am installing a TT DigiFlight II VSVG sytem (AFS branded) in my RV-8. The pitch servo is the B series, and it seems to have excessive gear backlash. The servo arm will 'wiggle' fore/aft about 1/32" which seems excessive to me. This servo has a similar amount of axial play on the output shaft as well. The roll servo (B series as well) is much tighter with very little backlash or axial play, less than 1/64".
Does anyone know if this is too much play for the pitch servo? TT indicates this is OK, but it seems to me that much play in the servo will cause the AP to have a hard time controlling the aircraft in pitch.
Thanks
Does anyone know if this is too much play for the pitch servo? TT indicates this is OK, but it seems to me that much play in the servo will cause the AP to have a hard time controlling the aircraft in pitch.
Thanks
Last edited: