What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon servo's

pmshep

Active Member
Please advise which servo's I should order for my 14-A.
Spruce doesn't list anything for the 14 although I suspect they are the same as the 10 ? Can someone who has already installed them advise.
Thanks 140015. DVT
 
Not a complete answer for your question but I am installing SV-42 servos in my -7A to help handle bumpier rides without disengaging.

Dynon has a video on the topic that you might find helpful.
 
I am posting a thread with a start on the wiring of the Garmin GSA 28 servo for roll using the standard RV-14 harness supplied by Vans.
We are also have a Garmin GSA 28 servo for pitch but as the RV-14 kit wiring doesn't support a pitch servo I will do the wiring for the pitch servo from scratch, and I may post what was involved once I'm done if it helps anyone else.
http://www.vansairforce.com/community/showthread.php?t=99037&page=3
 
Last edited:
Back
Top