Freightdawg
Well Known Member
Today we attempted to install the wings (well, the left wing) for the first time. I was worried about the spar fitting between the Center-Section Bulkheads, but it slid right in.
But before the holes in the spar and bulkheads aligned, the bottom corner of the tank attach bracket (T-1005-L) contacted the fuselage.
Anyone else run into this problem?
I called the mother ship after we got home from the hangar, and the suggestion I got was trying to sweep the wing sightly aft. We'll give a try tomorrow,
But before the holes in the spar and bulkheads aligned, the bottom corner of the tank attach bracket (T-1005-L) contacted the fuselage.
Anyone else run into this problem?
I called the mother ship after we got home from the hangar, and the suggestion I got was trying to sweep the wing sightly aft. We'll give a try tomorrow,