Nihon_Ni
Well Known Member
I've searched all through the threads here, and this topic has been discussed a few times over the years, but unfortunately most of the "see the details in this picture" picture are missing, so the discussion wasn't much help.
I'm building an RV-8, I have an Infinity stick grip and a stock Van's flap motor. I know I need some type of relay between the flap switch on the stick and the motor, but I'd like some feedback on how to proceed. My switch is an (ON)-OFF-ON variety with the spring loaded direction in the flaps down direction.
Here's the options I'm considering, but I'm sure there's options I've missed.
1. Use two relays and two micro switches and wire it according to Bob Nuckolls' drawing.
2. TCW Flap controller.
3. Van's Flap Positioning System
Any feedback on these options or others?
Thanks,
Rob
I'm building an RV-8, I have an Infinity stick grip and a stock Van's flap motor. I know I need some type of relay between the flap switch on the stick and the motor, but I'd like some feedback on how to proceed. My switch is an (ON)-OFF-ON variety with the spring loaded direction in the flaps down direction.
Here's the options I'm considering, but I'm sure there's options I've missed.
1. Use two relays and two micro switches and wire it according to Bob Nuckolls' drawing.
2. TCW Flap controller.
3. Van's Flap Positioning System
Any feedback on these options or others?
Thanks,
Rob