Originally Posted by Rocktaupo
I will be priming the inside of my '12 as I build.
Is there any benefit to priming the outside at the same time? Easier than priming the completed airframe? Or will there likely be too much touch up to do after completion?
Not if you plan to have a paint shop paint it. They will strip it. If you plan to paint, choose a primer compatible with your finish paint but you'll have to scuff it.
Estes Park, CO
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.