Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-9/9A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 08-03-2017, 04:11 AM
Neal Trombley Neal Trombley is offline
Join Date: Aug 2016
Location: North Fort Myers
Posts: 215
Default Purchased wing kit 85% done info please

I was sent great pics and feel comfortable with the purchase.
I spoke with vans on transferring serial numbers etc all is good on that front.
Issue now is getting the fuselage SB version from vans.

I keep reading that there is a center piece that has to line up or work with the wings? I'm confused on this.

When I do order the fuselage is there anything I need to do or request from vans?

I really wanted to SB my wings but the savings was to great to pass up.

As usual thank you in advance.
Neal Trombley
SW Florida
EAA 66
N517NC ( reserved)
Dues Paid
NOV 2016
July 2017
Dec 2017
Reply With Quote
Old 08-03-2017, 06:34 AM
BoilermakerRV's Avatar
BoilermakerRV BoilermakerRV is offline
Join Date: Jun 2009
Location: Danville, IN (West of Indy)
Posts: 168
Default Should be Included

The fuselage center section that you are referring to actually ships with the wing kit and the matching spars. The wing kit also includes the fuselage longerons, so be sure those are included as well.
Danville, IN

RV-7A Fuselage
N317PU Reserved
2017 Dues paid (July 2017)
Reply With Quote
Old 08-03-2017, 08:17 AM
cczarnik cczarnik is offline
Join Date: Sep 2016
Location: Middle TN
Posts: 90

Serial #'s may not match the center section with the wings. At least they didn't in my -7 shipped from Vans. But you should have the center and the longerons with the wing as mentioned before.
7a emp complete, wings underway
VAF Dues paid - 2017
Reply With Quote
Old 08-03-2017, 08:32 AM
airguy's Avatar
airguy airguy is offline
Join Date: Oct 2006
Location: Garden City, Tx
Posts: 3,936

According to the older project builders this used to be a quite critical dimension, that the wing spars would have to be matched by serial to the center section - but in 2008 when I was building my wings I was one of a handful of builders that got wing spars that had the flanges incorrectly bent, and ultimately had them replaced.

During conversations with The Mothership they informed me that my concerns about the close match on the spars to the center section were no longer a major problem, the current machining process was adequate to mix/match the serials without an issue. They shipped a new pair of main wing spars and sure enough when it came time to mount the wings, no problems were encountered.

Perhaps Scott can throw some historical clarification on that.
Greg Niehues - VAF 2017 dues paid
Garden City, TX
N16GN flying!
Built an off-plan 9A with too much fuel and too much HP. Should drop dead any minute now.
Reply With Quote
Old 08-03-2017, 08:55 PM
bret's Avatar
bret bret is offline
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,718

Bought quick build wings and built a SB fuse and bought a center section somewhere else, you can mix and match no worries.
7A Slider, EFII Angle 360, CS, SJ.
2018 gladly supported
Reply With Quote
Old 08-03-2017, 10:08 PM
mfleming's Avatar
mfleming mfleming is offline
Join Date: Sep 2016
Location: Joseph, Oregon
Posts: 110
Thumbs up

Yes, I agree with the consensus that the center section does not have to match.

I ordered standard wing kit and a quick build fuselage.

When the fuselage arrived, it was a clunker .

Returned it to Van's and picked up a new fuselage...

No concerns about matching spars and center section.
Michael Fleming
Joseph, OR
sagriver at icloud dot com

RV-7 Slider #74572
Empennage (sans fiberglass)
Ailerons and flaps complete.
Wings done (sans fiberglass)
Started on QB fuselage
Donated 2017
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 07:23 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.