Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-7/7A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 03-04-2018, 04:56 PM
Mlidzct Mlidzct is offline
Join Date: Nov 2016
Location: Southington, Ct
Posts: 86

Originally Posted by dbaflyer View Post
I wouldn't drill out the F711. You might cause more damage needing more fixing. This is a "known" issue with the QB fuselage. After going around with Van's I ended up buying some special length pop rivets that worked. MK319 are too short. They had to be set gradually and pushed in as I went. I have no screw there for the fairing.
Would you mind sharing what pop rivet you got to work in this location? Im building a 7A quickbuild and this rivet is not factory set and impossible to set now with the deck and angles already done at the factory
RV-7A QB under construction
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 03:18 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.