After reading various threads on this topic, and doing some experiments with my own setup, I've concluded that I want to drill my carb jet up, like so many others have done with good success (i've got an O-320-D2A).
I've been looking for a good write-up with lots of pictures showing in detail the process of disassembling hte carb to the point where I can take out the main jet. I haven't yet found anything as detailed as I'm looking for (especially pictures).
Can anybody point me to a good source for information/pictures?
My carb model is Marvel-Schebler 10-5217SP
I've been looking for a good write-up with lots of pictures showing in detail the process of disassembling hte carb to the point where I can take out the main jet. I haven't yet found anything as detailed as I'm looking for (especially pictures).
Can anybody point me to a good source for information/pictures?
My carb model is Marvel-Schebler 10-5217SP
Last edited: