I tried twice to calibrate the fuel level and it continues to show about 3 gallons short in each tank. NOTE: I have the capacitance tanks.
I discussed this with a Dynon rep. at OSH and he claimed to work the system to get the gauge pretty accurate. As you know, the method to calibrate the tanks is to pour 2 gallons in at a time. After you pour each 2 gallons, you activate the button after each pour until you have 21 gallons poured.
The Dynon rep said he starts off by pouring an amount of fuel more or less then the full 2 gallons. I can't remember just exactly what he said. Can someone help me with this?
I discussed this with a Dynon rep. at OSH and he claimed to work the system to get the gauge pretty accurate. As you know, the method to calibrate the tanks is to pour 2 gallons in at a time. After you pour each 2 gallons, you activate the button after each pour until you have 21 gallons poured.
The Dynon rep said he starts off by pouring an amount of fuel more or less then the full 2 gallons. I can't remember just exactly what he said. Can someone help me with this?