What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

G5 CAN bus termination ??

noelf

Well Known Member
A question on a single G5 used as an Attitude Indicator: no other devices are connected to the G5, so is it required to terminate the CAN bus pins at the G5?
 
A question on a single G5 used as an Attitude Indicator: no other devices are connected to the G5, so is it required to terminate the CAN bus pins at the G5?


No. Even the FAA approved STC install manual shows them open when nothing is connected.
 
No.
Installed one on my previous aircraft as a standalone unit without any termination... worked perfect.
Loved it so much that I have ordered one for the RV now :)
 
Back
Top