VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Prev Previous Post   Next Post Next
  #1  
Old 02-22-2018, 05:21 PM
DeltaVee47 DeltaVee47 is offline
 
Join Date: May 2017
Location: Houston, Tx
Posts: 31
Default Toe in

Hi all
Just finished installing main gear. Very challenging for one guy but got it done.
However after installing the U00009 main gear axles I did the string test per the plans and Iíve got a ďyĒ measurement of 15 mm or 8 degrees of toe in on both sides. This seems huge since the plans say no more than .25 degrees is acceptable. I donít see how shims of .75degrees are going to fix this.
Guess Iíll call Vans tomorrow but feeling very discouraged right now.
Any ideas very much appreciated.
Thanks for listening
Greg Beckner
140-366
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:19 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.