VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-05-2018, 07:12 PM
vernon smith's Avatar
vernon smith vernon smith is offline
 
Join Date: Jun 2017
Location: Naples FL
Posts: 143
Default Blown "2 amp start fuse"

We did some checking and found the Rotax solenoid has 4.2 ohms resistance. then put an amp meter in the fuse position and get 2.2 amps draw during cranking. These numbers jive pretty well with Mr. Ohms law so the question is, should the start fuse be larger or am I developing a bad solenoid?

We could not find any specification for the Rotax solenoid but all the other solenoid specifications we were able to find would draw more amps than the Rotax.
Reply With Quote
  #2  
Old 05-05-2018, 07:25 PM
DHeal DHeal is offline
 
Join Date: Sep 2006
Location: Windsor, California
Posts: 697
Default

I believe that Van's approved a 3 amp fuse for the starter circuit several years ago -- check with Van's techs. My circa 2013 RV-12 plans depict a 3 amp starter fuse. I have had no problems with this 3 amp fuse.
__________________
David Heal - Windsor, CA (near Santa Rosa)
EAA #23982 - EAA Technical Counselor and Flight Advisor; CFI - A&I
RV-12 E-LSA #120496 (SV w/ AP and ADS-B) - N124DH flying since March 2014 - 650+ hours (as of July 2018)!
VAF donation through June 2019.

Last edited by DHeal : 05-05-2018 at 07:29 PM.
Reply With Quote
  #3  
Old 05-05-2018, 07:27 PM
skydiverlv skydiverlv is offline
 
Join Date: Jul 2008
Location: kansas
Posts: 282
Default

http://www.vansairforce.com/communit...ght=start+fuse
__________________

Larry Vandegrift
ULPower 260is, dual ECUs, dual 30 amp alternators
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:21 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.