VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-18-2019, 11:52 AM
old84ag old84ag is offline
 
Join Date: Sep 2015
Location: Frisco TX
Posts: 9
Default Double drilled skin help

I don't even know how or when I did this. I was repairing a previous goof. The previous goof was on the horizontal stabilizer where the front spar mates with the reinforcement angle and the spar doubler. In replacing that mess I had to redrill the new inboard ribs. Somehow I didn't line everything up right.

Any ideas on going forward? Fix or replace?

My first try at adding an image. Hopefully it works.


https://1drv.ms/u/s!AlD4fn7Jh3f0gbxd7hLG-J24l76q1Q

https://1drv.ms/u/s!AlD4fn7Jh3f0gbxb9y8TpDTXLSVUfg

https://1drv.ms/u/s!AlD4fn7Jh3f0gbxcAUXuzOTSzxs8OQ
Reply With Quote
  #2  
Old 05-18-2019, 01:09 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,286
Default Figure 8 hole

Ask Vans to be certain, but I think you can add a hole either side equally spaced while respecting edge distance. The offending hope maybe gets a rivet and some filler.
I didn't sleep in a Holiday Inn.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/27/2018. Plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #3  
Old 05-18-2019, 02:45 PM
old84ag old84ag is offline
 
Join Date: Sep 2015
Location: Frisco TX
Posts: 9
Default

Well I did stay in a Holiday Inn. Maybe thatís the problem.

Iíll call Vanís Monday. Either for a fix or more parts.

Thanks
Reply With Quote
  #4  
Old 05-18-2019, 02:54 PM
BobTurner BobTurner is offline
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 5,699
Default

Whenever I read the word "spar" I would suggest calling Vans, with good photos. IMHO that's more important than the skin shown here. You absolutely want spar repairs done correctly.
With that said, if it were I, I'd get new parts and start over. You'll always know you have those two holes close together, even if no one else does. Call it a learning experience.
Reply With Quote
  #5  
Old 05-18-2019, 11:07 PM
HAL Pilot's Avatar
HAL Pilot HAL Pilot is offline
 
Join Date: Nov 2015
Location: Las Vegas NV
Posts: 86
Default

I had a similar issue with the empennage skin with a dimple. The Official Vans answer was to drill two new holes either side. same spacing but in the middle so offending holes have the correct spacing to not be needed.
__________________
Pete

RV14A Tail kit build in process
RV 14 WIKI in process, residing on Drop Box

https://www.dropbox.com/sh/xu5p6f4l7...bU0ck0pJa?dl=0

---For Edit Access drop me a PM with your Email address.
EAA 1300
Donation Paid 2018, 2019 Military exempt but paid any way Cause its worth it.
Reply With Quote
  #6  
Old 05-19-2019, 05:24 PM
Maxrate Maxrate is offline
 
Join Date: Dec 2008
Location: League city, TX
Posts: 426
Default

Agree with Pete. Two new holes and -3 rivets either side and epoxy over the buggered hole. Problem solved, especially if thatís the bottom of the skin.
__________________
Mark Malone, RV7
Wings complete, SB 14 complied with, fuselage in progress.
N442MM reserved
http://www.mykitlog.com/MikeMike

2018 Donation gladly paid.
Reply With Quote
  #7  
Old 05-19-2019, 05:34 PM
old84ag old84ag is offline
 
Join Date: Sep 2015
Location: Frisco TX
Posts: 9
Default

Thanks for the good advice, I feel much better about it now. I'll post what Van's says after I call them.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.