dbaflyer
Well Known Member
My alternator had a very small leak which looked like it was coming from the lower inboard side so I pulled it off and ordered a new gasket.
My alternator (B&C) had red circles of material on each location of the gasket holes. In order to clean the surface good, I had to remove all of those. What purpose would those serve and are they required?
Pic 1
Pic 2
Pic 3
Sorry about the photo links. The
My alternator (B&C) had red circles of material on each location of the gasket holes. In order to clean the surface good, I had to remove all of those. What purpose would those serve and are they required?
Pic 1
Pic 2
Pic 3
Sorry about the photo links. The