jhearnsberger
Active Member
Ok, I am down to the point where I am going to seal up the trailing edge of the elevators and rudder. I have done a little research on using proseal, but still need help.
I have one 3.5oz tube without dispensing gun and 2 quarts of proseal. I was thinking of attempting to mix the 3.5oz tube and squeeze it out somehow so it won't be wasted.
The syringe method sounds like a good idea. Although, the plastic bag method probably works well too.
Say I have some left over in the tube or in the syringe...... How long will it last once mixed if it is stored in a refrigerator or freezer? I have not read the mixing instructions yet for the quart kits.
- Jake
I have one 3.5oz tube without dispensing gun and 2 quarts of proseal. I was thinking of attempting to mix the 3.5oz tube and squeeze it out somehow so it won't be wasted.
The syringe method sounds like a good idea. Although, the plastic bag method probably works well too.
Say I have some left over in the tube or in the syringe...... How long will it last once mixed if it is stored in a refrigerator or freezer? I have not read the mixing instructions yet for the quart kits.
- Jake