Building an RV14A and I put the breather tube down the firewall as per plan. the tube (about 5/8") has a 90 degree bend on the top attached to the Lycoming 390.
But right above the oil filter, near the vent hose pointing directly to the firewall is another, what looks to be a vent. It is about 3/4" and looks to accept a hose.
Where can I find it on the plan? Should it get an oil/water spectator? Should have been supplied?
I am grateful for the help!
Thanks, Larry
But right above the oil filter, near the vent hose pointing directly to the firewall is another, what looks to be a vent. It is about 3/4" and looks to accept a hose.
Where can I find it on the plan? Should it get an oil/water spectator? Should have been supplied?
I am grateful for the help!
Thanks, Larry
Last edited: