Hi,
I have 4 dimple dies which I am unable to identify and which don’t have any markings.
I’ve measured the shank size of the ‘pilot’ but can’t really reconcile these against the drill / rivet / screw reference chart. Hoping someone can help!
Die 1: 0.185”
Best guess is this is a -6 3/16” rivet maybe?
Edit: Or more likely a #10 screw? (A 3/16 rivet is 0.1875 so bigger than the dimple shank)
Die 2: 0.134”
Pretty sure this is a #6 screw but not 100%
Die 3: 0.163”
Pretty sure this is a #8 screw but also not 100%
Die 4: 0.154”
Maybe a -5 5/32 rivet??
Here are the images:
I have 4 dimple dies which I am unable to identify and which don’t have any markings.
I’ve measured the shank size of the ‘pilot’ but can’t really reconcile these against the drill / rivet / screw reference chart. Hoping someone can help!
Die 1: 0.185”
Best guess is this is a -6 3/16” rivet maybe?
Edit: Or more likely a #10 screw? (A 3/16 rivet is 0.1875 so bigger than the dimple shank)
Die 2: 0.134”
Pretty sure this is a #6 screw but not 100%
Die 3: 0.163”
Pretty sure this is a #8 screw but also not 100%
Die 4: 0.154”
Maybe a -5 5/32 rivet??
Here are the images:
Last edited: