Had an unusual occurrence with my G3X touch 10.5. During my flight, about 2.5 hours into the flight, both the PDF and MFD froze up. Neither screen would respond to any ?touch? inputs. The flight info was still operational. I could not toggle by touch anything. Any touch command for radios, auto pilot, transponder did not respond. Since the transponder and comm two are remote, what was displayed could not be changed (i.e. could not change comm 2 frequency or switch, could not change transponder code) It happened just as I touched the comm two (remote). Not sure if this was the trigger or not. The knobs and buttons continued to worked. It remained in this state for approximately 1/2 hours. It seemed to unfreeze when I began to activate the VS on the autopilot control head (which still worked), this could have been a coincident, but suddenly the touch function became operational. First time this has occurred since first flight 02/2018. The last software 6.64 is currently running. Have not loaded 6.71. And of course the timing sucked since I was IFR ant the time.
I did email Garmin and passed it on as a FYI. Has anyone else had this happen?
I did email Garmin and passed it on as a FYI. Has anyone else had this happen?