Pilotjim77
Well Known Member
I just removed my Garmin 295 GPS from the panel in order to remove my radio, which has been having some issues. I want to get the radio bench tested. This is what the wiring looks like as seen through the panel hole for the GPS:
I don't like the looks of this at all. I'm thinking I need to address this. Any thoughts on the best way to approach this? I'm not looking to upgrade, just fix and clean this up.
I don't like the looks of this at all. I'm thinking I need to address this. Any thoughts on the best way to approach this? I'm not looking to upgrade, just fix and clean this up.
Last edited: