What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Canopy latch Torque tube block question

Stockmanreef

Well Known Member
I am trying to install the torque tube assembly and it appears that this point that it won't fit with the Torque tube blocks in place (C-01420- L/R).

Are the holes for the torque tube in the C-01420 blocks supposed to be drilled all the way through?

I think that I am off by at least 1/4" or more from being able to get the assembly to fit.
 
Not to revive an old thread, but....

I'm at this point and having the same issue. What was the resolution for this?

Thanks,

-Dan
 
Back
Top