Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-12-2017, 09:38 PM
rvdave rvdave is offline
Join Date: Jun 2005
Posts: 350
Default Not pretty but useful

This became my first welding project-- to make a towbar for the 10. Since I'm at the point of needing to move it around I had to wrap it up. Learning a lot about welding now but have a useful device to put to work. I've installed the steel helicoil and extended the bolt with a spacer to extend about 1/4 outside the pant. The right side of the bar slides in or out and locks to the in position. The handle extends another 2 feet if needed. Ok back to the project.

Dave Ford
Cadillac, Mi
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:03 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.