A couple weeks ago i recall a post about wiring for the canopy microswitch. The builder said he had to remove 13 rivets to install the wire. I am very bearly at that stage and i definitely don?t want to remove that many rivets for a simple wire pull.
I looked at the plans and pulling the wire to the switch is not mentioned as far as i could find. Have you run into this issue? Trying to avoid needless work here.
Thanks for any guidance.
Bruce
I looked at the plans and pulling the wire to the switch is not mentioned as far as i could find. Have you run into this issue? Trying to avoid needless work here.
Thanks for any guidance.
Bruce