I have about 10 hours on my RV-10 and pretty much since the beginning the manifold pressure does not remain steady when in level flight. It seems to "hunt" up or down about 1" or so.
I am pulling pressure from cylinder 6 area to the three position AL block on the firewall where the Garmin three wire sensor is mounted. I resealed all those connections and am now wondering if there is something else at play?
Thoughts on a cause or where to start looking?
E
I am pulling pressure from cylinder 6 area to the three position AL block on the firewall where the Garmin three wire sensor is mounted. I resealed all those connections and am now wondering if there is something else at play?
Thoughts on a cause or where to start looking?
E