What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

FlyEFII

Welcome to VAF.

FlyEFII is a paid advertiser on this site and I believe a number of people have used this system.

Do a search in this forum for EFII or system32 and there are a number of discussions. You are sure to get a number of responses on this system (and possibly regarding the SDS system as well).

I can't speak to either one personally, but do plan an EFII system from either SDS or FLYEfii. From what I can tell they seem both vendors have a very good setup and just depends on what you are looking from the system.
 
Carlos----definitely takes some prior planning for the systems. More involved plumbing, duplex sleector valve, AND if you are putting it a 6A it will be a task, since there are differences between the 6A and the 7A that is more common with this type of system.

Tom
 
Welcome to VAF

Carlos, welcome aboard:D

Whatever you do for the EFI, pay attention to what Tom said about planning the fuel system to support it.
 
Carlos,

I put an EFII in my 6A. Tom mentioned that it is a "task". I have no point of reference for a 7A, but I installed it in mine. If you get serious, PM me and we can discuss over the phone. There are things I can share from my learnings. You can also look at my website. Many pictures.

Paul
 

Trust me, we all do.

The page you linked shows a system no longer available. That system was based on re-badged SDS ECU, in a model now considered obsolete by both SDS and EFII.

EFII is introducing its first ECU, called System 32. There are beta units out there, but I don't know if the system is actually available at this time. There is no manual for download, so not much is known beyond promotional material:

https://www.flyefii.com/system-32/

SDS has been building EFI ECU's for a long time:

http://www.sdsefi.com/

http://www.sdsefi.com/aircraft.html
 
Back
Top