Standard RV10 and today I have connected the fuel pump for the first time. I can hear a faint clunk sound from it but nothing else on Pump On. Yes I know that it should not be run without fuel, but thought one or two seconds will do no harm. It trips the VPX even at 15A. Monitored it with the laptop and I am getting a Short Circuit message from VPX.
I have even tried an independent supply at 12V with the same result.
Wondering if it will help to push a bit of Avgas through it and then try again? Your advise is welcome - before I dive n there to get it out and halfway around the world
I have even tried an independent supply at 12V with the same result.
Wondering if it will help to push a bit of Avgas through it and then try again? Your advise is welcome - before I dive n there to get it out and halfway around the world