Catto Repitch Cost

rph142

Well Known Member

• Feb 26, 2015

• #1

Just curious, how much did your catto repitch cost?

 

Mark Albery

Well Known Member

• Feb 26, 2015

• #2

$350 total on a 3-blader and he even included painting the spinner to match.

That was to coarsen it by a good 100 RPM. Going fine is easier according to Craig, but the same cost I believe.

 

M

moll780

Well Known Member

• Mar 4, 2015

• #3

I think it was 110 or so for shipping my 2 blade back and forth and he didnt charge for the re-pitch.

rph142 said:

Just curious, how much did your catto repitch cost?

Click to expand...

 

Mark Albery

Well Known Member

• Mar 5, 2015

• #4

I believe Craig will do one re-pitch FOC if you buy one of his props.

He likes to have happy customers!

 

edneff

Well Known Member

• Mar 5, 2015

• #5

I did not know the prop could be repitched. I have a 3 blade w/ NLE on my RV7... Has anybody had one of these repitched?

 

C

cubdriver

Well Known Member

• Mar 5, 2015

• #6

Catto

Yes, My NLE was recently re-pitched. Not sure how he did it but it turned out perfect.

 

AX-O

Well Known Member

• Mar 5, 2015

• #7

cubdriver said:

Yes, My NLE was recently re-pitched. Not sure how he did it but it turned out perfect.

Click to expand...

He basically changes the profile of the airfoild by adding glass to the original blade.

 

rph142

Well Known Member

• Mar 6, 2015

• #8

It looks like mine was 350. He added a few stips of carbon to the underside of the trailing edge. The cord length is slighly (1/8-1/4") longer as a result. If you havent been to his shop lately I highly recommend it. He is building carbon fiber wings for a few reno racers.