VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-25-2019, 12:45 AM
az_gila's Avatar
az_gila az_gila is offline
 
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 9,920
Question Flox tool question

Guys, what tools are you using to apply flox?

I have used popsicle sticks (large and small) and flex putty knives but can't seen to find a tool to apply small amounts neatly into corners.

What are you using?
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Reply With Quote
  #2  
Old 06-25-2019, 12:59 AM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 14,831
Default

Yellow plastic bondo spreaders from auto body shop.

You can cut/shape as needed.

__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #3  
Old 06-25-2019, 05:05 AM
rocketman1988 rocketman1988 is offline
 
Join Date: Jun 2010
Location: Sunman, IN
Posts: 1,771
Default Spreaders

Harbor freight has the yellow plastic spreaders...
__________________
Bob
Aerospace Engineer '88

RV-10
Structure - 90% Done
Cabin Top - Aaarrghhh...
EFII System 32 - Done
297 HP Barrett Hung
ShowPlanes Cowl with Skybolts Fitted - Beautiful
Wiring...

Dues Paid 2018,...Thanks DR+
Reply With Quote
  #4  
Old 06-25-2019, 06:10 AM
Auburntsts's Avatar
Auburntsts Auburntsts is offline
 
Join Date: Jan 2005
Location: Tampa, FL
Posts: 2,742
Default

I've used a gloved finger more times than I can count.
__________________
Todd “I drink and know things” Stovall
PP ASEL-IA
RV-10 N728TT - Flying!
WAR EAGLE!
Reply With Quote
  #5  
Old 06-25-2019, 06:13 AM
snopercod's Avatar
snopercod snopercod is offline
 
Join Date: Aug 2016
Location: Asheville, NC
Posts: 1,872
Default

In a corner, the rounded tip of a Sharpie marker worked well for me. I also have a 4" length of 3/8" o.d. Teflon pipe that's handy on straight corners. The technique I used was to mask off the area on either side of the bead, apply the flox, then remove the masking tape with the excess flox. One final pass with the tool feathered out the edges. Sometimes I would use peel-ply over the joint.
__________________
(2019 dues paid)
Reply With Quote
  #6  
Old 06-25-2019, 09:29 AM
David Paule David Paule is offline
 
Join Date: Dec 2009
Location: Boulder, CO
Posts: 3,971
Default

I trim popsicle sticks to the shape I want. Any shape, as long as it's small. Metal cutters and a file for clean up, with scissors also working.

Dave
Reply With Quote
  #7  
Old 06-25-2019, 09:50 AM
tomkk's Avatar
tomkk tomkk is online now
 
Join Date: Apr 2014
Location: Port Orange, Fl
Posts: 854
Default

Quote:
Originally Posted by David Paule View Post
I trim popsicle sticks to the shape I want. Any shape, as long as it's small. Metal cutters and a file for clean up, with scissors also working.

Dave
Yeah, I do the same with tongue depressors. Can trim to most any shape ...
__________________
Tom
Port Orange, Fl
RV-12 N121TK ELSA #120845; first flight 06/10/2015; 650 hrs as of 09/2019
RV-12 N918EN ELSA #120995 Eagles Nest Project; first flight 05/18/2019
SPA Panther N26TK in progress
Reply With Quote
  #8  
Old 06-25-2019, 09:59 AM
thinkn9a thinkn9a is offline
 
Join Date: Nov 2007
Location: Mississippi
Posts: 258
Default Caulk tool?

I haven’t worked flox,... but have used the caulk tools. Suspect they would work on small corners. The yellow spreaders mentioned earlier would be needed for larger areas.


Quick online search should get some good pics.
__________________
Wallace & Marietta Goodloe
9A -QB
N211LV
Phase 2 has started!
Thanksgiving time, is dues time for us
Reply With Quote
  #9  
Old 06-25-2019, 10:26 AM
Lynnb's Avatar
Lynnb Lynnb is offline
 
Join Date: Jan 2014
Location: Cedar Hill, TX
Posts: 299
Default

I've also taken to using some cheap silicon kitchen spatulas, both Mini and regular sized. I like that they are super flexible and easy to clean and reuse.

Lynn
__________________
RV-10 in Process
Reply With Quote
  #10  
Old 06-25-2019, 12:17 PM
rv7charlie rv7charlie is offline
 
Join Date: May 2006
Location: Pocahontas MS
Posts: 3,871
Default

Is your mix too thick to apply with a 'horse syringe' ? That would get it into the corner, and then you could dress it with fillet tool of choice.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:05 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.