Rrhsch
Active Member
I have added a B and C spline alternator on the Rotax as a back up and to supply the power for heated pitot, MFD and VOR/ILS.
I am installing the Silent-Hektik from Vans And I would like to add a switch to turn the alternator off in case of a failure. I have searched this forum and I am unclear as to what wire I should be using to switch off the alternator when using the Silent-Hektik VR.
The Z16 drawing shows the C wire connected to the alt on off switch. Would this be the same for the Silent-Hektik?
I am installing the Silent-Hektik from Vans And I would like to add a switch to turn the alternator off in case of a failure. I have searched this forum and I am unclear as to what wire I should be using to switch off the alternator when using the Silent-Hektik VR.
The Z16 drawing shows the C wire connected to the alt on off switch. Would this be the same for the Silent-Hektik?