VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-11-2018, 09:29 PM
rv6ehguy rv6ehguy is offline
 
Join Date: Jan 2007
Location: Toronto, Ontario
Posts: 166
Default Beringer main wheels with Matco brake pistons?

Good evening Van's Air Force brain trust,
Is any one out there using Beringer's wheels and brake calipers with Matco brake pistons, Cleveland calipers, and brake lines provided in the Van's kit? What are the pros and cons? I have spoken with Beringer reps. and they do not recommend mixing their parts with non-Beringer parts. I am interested in getting unbiased answers which I do not think are coming from Beringer. It seems to me that Matco pistons do the same as Beringer pistons. Both push hydraulic fluid to the brake calipers. Does any one have experience with this set-up I am describing here? Any advice will be greatly appreciated. Thanks for your time.
John Van Lieshout
Vans RV6A QB
AeroSport Power IO-375 M1S (195 HP)
Garmin G3X 2 screen suite

Last edited by rv6ehguy : 01-11-2018 at 09:36 PM. Reason: added Cleveland calipers
Reply With Quote
  #2  
Old 01-12-2018, 08:20 AM
Walt's Avatar
Walt Walt is offline
 
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 4,416
Default

Totally different designs, floating caliper vs floating disc.
You cannot intermix these parts.
__________________
Walt Aronow, Dallas, TX (52F) RV7A, IO360, C/S, 1500+hrs

EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1700+ hrs
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154
Reply With Quote
  #3  
Old 01-12-2018, 12:19 PM
TS Flightlines TS Flightlines is offline
 
Join Date: Apr 2010
Location: Ridgeland, SC
Posts: 1,940
Default

John--
the Beringer master cylinders and calipers use banjo style hose fittings, that are different from the AN style fittings and adapters most of us use. The Vans plastic tubing for the cabin lines are a compression design, again not compatible with Beringers.

BUT--you can use the Beringer maser cylinders in your 6A, as long as you use the banjo fittings at the masters. In other words, a banjo hose end on one side, and a AN hose ends on the other. We do that with our RV conversions. The calipers may only fit the Beringer axles, so that would have to be determined.

But dont try and use the Matco or Cleveland PISTONS from their masters or calipers in a Beringer master or caliper.

Tom
__________________
Tom Swearengen, TS Flightlines LLC
Teflon Hose Assemblies for Experimentals
Proud Vendor for RV1, Donator to VAF
RV7 Tail Kit Completed, Fuse started-Pay as I go Plan
Ridgeland, SC
www.tsflightlines.com
Reply With Quote
  #4  
Old 01-12-2018, 01:52 PM
Larco Larco is offline
 
Join Date: Mar 2005
Location: DVT Phoenix
Posts: 941
Default

I may be wrong but if I understand you correctly you are referring to the MASTER CYLINDERS connected at the brake pedals as pistons. If so then it might be causing some confusion?
__________________
Larry
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:01 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.