VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #31  
Old 12-31-2017, 12:54 PM
skylor's Avatar
skylor skylor is offline
 
Join Date: Aug 2009
Location: Southern California
Posts: 577
Default

Quote:
Originally Posted by Northernliving View Post
Skylor,

How did you get the holes all lined up w/out a jig?
I made very careful measurements to lay out the holes, then used a small drill press to drill them.

Skylor
Reply With Quote
  #32  
Old 12-31-2017, 06:04 PM
Northernliving Northernliving is offline
 
Join Date: May 2005
Location: Boston, MA
Posts: 57
Question Completed plane?

Quote:
Originally Posted by skylor View Post
I made very careful measurements to lay out the holes, then used a small drill press to drill them.

Skylor

Skylor, was this on a completed plane or was it during the build process when you could put the roll bar on a drill press?

Brian
__________________
Brian J.
Boston, MA
RV8 Based at ORH - Purchased
RV8 - The Dream - Under Construction
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:07 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.