VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-13-2015, 01:12 PM
Gandalf Gandalf is offline
 
Join Date: Apr 2008
Location: Medford, OR
Posts: 271
Default 31b-21 Step 3 Backshell

I called Vans today when I was unable to locate the ES 9 Pin Backshell 2 in my finish kit. The ES 9 Pin Backshell 2 required for step 3 is not included in the finish kit. So no need to search for the missing part, the backshell is part of the Avionics kit.

Jeff
Reply With Quote
  #2  
Old 08-13-2015, 10:52 PM
Bill_H's Avatar
Bill_H Bill_H is offline
 
Join Date: Aug 2010
Location: Peel, AR
Posts: 1,760
Default

FYI:

The backshell to that DB-9 is special because of the screws - the "Backshell 2" as listed by Vans. Remember, the backshell is not the plug! The backshell 2 has shorter screws that require a screwdriver (shorter than all of those thumbscrew-type backshells behind the panel) that do not interfere with the magnetometer that is part of the ADAHRS unit. (But they are NOT "non-magnetic" screws.)
Reply With Quote
  #3  
Old 12-20-2017, 07:45 PM
Bmoore4rv Bmoore4rv is offline
 
Join Date: Sep 2015
Location: Ocala, FL
Posts: 2
Default es 9 pin backshell Thanks -

post of backshell furnished in the finish kit - saved lots of time
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:12 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.