Im getting to the point where I am going to paint my 9a. I remember how much of a pain it was to install the wing bolts but I am not sure if it is worse to remove them. I have access to an automotive paint booth that would allow me to do a nice clean coat of paint but I would need the wings removed. I could make up a booth in the hangar Im in, but that will entail quite a bit of work to set up a not optimal spray booth. I am curious if anyone has removed the wings and how bad was the project? I am an automotive dealership tech so Im used to dealing with hard to access nuts and bolts, but Im concerned that there is something in the process that could be damaged.