Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 03-06-2018, 12:34 PM
W&L RV-6A W&L RV-6A is offline
Join Date: Mar 2018
Location: Woods and Lakes Airpark Ocklawaha, Florida
Posts: 1
Default Right Wing Heavy 6A

New to forum. I purchased an RV-6A. It wants to roll to the right. Cannot trim it up even moving the center stick trim all the way left (it swings back to center anyway). Someone suggested lowering right flap. Had to lower it 1.25 inches in order to make it fly level! Doesn't seem right. Read an old forum thread that talked about aileron trim tabs. Looking for some insight into the problem and how to proceed. Thanks.
Reply With Quote
Old 03-06-2018, 12:42 PM
Mike S's Avatar
Mike S Mike S is online now
Senior Curmudgeon
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 13,824
Default Welcome to VAF

Stuart, welcome aboard the good ship VAF.

Take a look at this thread

Also, you can search for heavy wing, use the advanced search, and be sure to set the time parameter "Find Posts From" to "Any Date"
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."

Last edited by Mike S : 03-06-2018 at 12:44 PM.
Reply With Quote
Old 03-06-2018, 01:23 PM
rvbuilder2002 rvbuilder2002 is offline
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 7,320

Start with reading chapter 5.7 of THIS DOCUMENT (Section 5 of the construction manual)
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 08:31 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.