What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

G3X + Starter Engaged annunciating

gfb

Well Known Member
I figured I could have a reasonable Starter Engaged annunciator by running the I-post on my starter solenoid to a Discrete Input (set to Active High) on the GAD27 but that does not seem to work. It looks like I have 14v at the I-post at all times, regardless of if the solenoid is energized or not.

What do I have wrong here? Do I have a defective solenoid or do I misunderstand how the I-post works on it?
 
Moderators: I've posted a similar question in the Electrical section of the forum, please feel free to delete this one.
 
The I post should only have power when you turn the key to start. It should drop power when key is in any position but start.
 
Back
Top