RV-8 spar spacers

RV-8 or RV-7 builders.

I no longer have any use for the CNC'd spar spacers I had made for the spar box during the fuselage part if my build.

Instead of using wood or washers I used these and my spars slid perfectly in place.

If anyone needs these, let me know. If you pay for the shipping, I'll send them along and when you are done with them, you can send them along to the next person needing them.

Machined holes at the end of the spar blocks so that you can put them on a rolling dolly as well.

Here's what the look like.

http://www.mykitlog.com/users/displ...&project=820&category=7636&log=163225&row=145

Installed:

http://www.mykitlog.com/users/displ...&project=820&category=7636&log=165511&row=120

On the rolling dolly:

http://www.mykitlog.com/users/displ...k&project=820&category=7636&log=168732&row=90

Cheers


Don

Ill take them! I literally spent 3 hours making them out of PVC and while mine are very close, they arent perfect. I'd happily pay for shipping and them pass them along when I'm done.

Spoken for

I'll reach out to you after Jan 1. Send me your address by pm and I'll get a shipping cost.

Don

Donation

Robby,

Send me your address by PM or email where you want the spacers shipped to and I'll send the spacers tomorrow. Instead of sending me anything, send the cost of shipping to Doug. I'll flip you the amount tomorrow.

Cheers,


Don