VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #21  
Old 05-18-2005, 02:42 PM
RV_7A RV_7A is offline
 
Join Date: Jan 2005
Location: Round Rock, TX
Posts: 806
Default

A few people have emailed asking about the peice I used below my panel for switches and such. It was the support peice that came with my QB. It was easy to just plate nut to the bottom of the original panel.
__________________
www.JeffsRV-7A.com
N808TX
Reply With Quote
  #22  
Old 05-18-2005, 04:09 PM
robertahegy's Avatar
robertahegy robertahegy is offline
Moderator/Tech Counselor
 
Join Date: Jan 2005
Location: East Troy, WI
Posts: 1,888
Default

Kahuna!!!! I bow to your panel!!! Awesome!!!!

Roberta
Reply With Quote
  #23  
Old 05-18-2005, 04:48 PM
rvpilot's Avatar
rvpilot rvpilot is offline
 
Join Date: Jan 2005
Posts: 332
Default Panel

OK, K, didn't want to show you up, but you forced my hand!! One extreme to the other, huh! Sorry the switches aren't in, only picture I had here!
BB
Reply With Quote
  #24  
Old 05-18-2005, 09:37 PM
dan's Avatar
dan dan is offline
 
Join Date: Mar 2005
Location: ...
Posts: 2,045
Default ACS2002 to AF2500

Kahuna, be sure to snag the latest software download which will convert your ACS2002 into an AF2500. Way cool stuff...percent HP or actual HP, etc.

)_( Dan
RV-7 N714D
http://www.rvproject.com
Reply With Quote
  #25  
Old 05-18-2005, 10:28 PM
JCN247DE JCN247DE is offline
 
Join Date: Jan 2005
Posts: 119
Default Panel maniacs Unite!

I sent Jeff B a panel pic for N247DE. Thanks for hosting it Jeff! I still have quite a bit of room on the right side of the panel. I'm thinking about a microwave oven or play station for those long X countries.

Walter, you should bronze your panel dude! It looks like it belongs in a 777. "That one goes to 11 !"

Jeff
Reply With Quote
  #26  
Old 05-19-2005, 05:26 AM
Kahuna's Avatar
Kahuna Kahuna is offline
Whelen LED Light Man
 
Join Date: Dec 2004
Location: Gold Hill, NC25
Posts: 2,315
Smile

Roberta thanks Buddy. The panel is one of the reasons I wanted to build another plane. I know, would have been easier to just build another panel in the 6, but... well I wanted that 6 banger anyways.

Sharpie, thanks for the heads up on the new software. Seems I knew nothing about it.

Barefoot Billy, I hope you have sunglasses for your PAX cause that yellow is BRIGHT man.

Kahuna
S8 Painting the fuse next week
Reply With Quote
  #27  
Old 05-19-2005, 07:25 AM
RV_7A RV_7A is offline
 
Join Date: Jan 2005
Location: Round Rock, TX
Posts: 806
Default

This is Jeff Conner's panel...
__________________
www.JeffsRV-7A.com
N808TX
Reply With Quote
  #28  
Old 05-19-2005, 06:09 PM
walter's Avatar
walter walter is offline
 
Join Date: Mar 2005
Location: Mansfield TX
Posts: 310
Default

Quote:
Originally Posted by JCN247DE
Walter, you should bronze your panel dude! It looks like it belongs in a 777. "That one goes to 11 !"

Jeff
Well I can't take all the credit. Fabian Lefler at Affordable Panels helped tremendously on the layout. I told him what I wanted and approximately where I wanted it and he did the layout with the proper geometries, dimensions, etc. And of course I couldn't have done it without looking at what Dan C. did and used his ideas about moving the ribs behind the panel in order to get the displays exactly in front/center of the pilot and copilot. In fact I probably stole most of the ideas. That's what is great about building your own. In the end, it's a compilation of great ideas from great people. If I had built this panel two years earlier it would have been all steam guages, very familiar. Just wait two more years and see what folks are putting in their panels then, Holy Moly. I can't wait to fly this thing. I hope many of you will be able to attend this weekend's Planes of Fame airshow at Chino AND Dan's link with more info. You'll be able to see my panel first hand (and all the mistakes I made too).

Last edited by walter : 05-19-2005 at 06:15 PM. Reason: mistake on date
Reply With Quote
  #29  
Old 05-19-2005, 10:45 PM
Dayton Murdock's Avatar
Dayton Murdock Dayton Murdock is offline
 
Join Date: Jan 2005
Location: Carson City NV
Posts: 501
Default RV4 Panel

This is the Panel that I made 2 years before starting the fuslage

Last edited by Dayton Murdock : 09-13-2005 at 03:05 PM.
Reply With Quote
  #30  
Old 05-20-2005, 06:58 AM
n2prise's Avatar
n2prise n2prise is offline
 
Join Date: Jan 2005
Location: East Ridge, TN
Posts: 420
Default Day/Night IFR panel for "Enterprise" RV-9A N2PZ.

This is the last picture of the panel with everything in it or ON it, except for my Garmin GPS 296. It connects to the Smart Coupler in the NavAid Devices wing leveler. The large blank panel in the radio stack is reserved for a GNS 480 IFR-approved GPS with WAAS when my budget will allow it. A Garmin AT SL-30 provides the IFR part of the panel for now. A Dynon D-10A is backed up by Van's altimeter, airspeed, and vertical speed air gauges. The switch panels are made from scrap 0.063" aluminum cut from the original Van's panel when I was making large "window" openings for the instruments to pass through it. The in-flight entertainment for the passenger is a Sanyo Tape/CD player combo unit routed through the Garmin GMA 340 audio panel.

I built this modular panel myself from a surplus road sign, 0.075" thick aluminum that measured 36" x 36". The original Van's panel serves as the back-up frame behind the panels that supports it all and the aluminum angles that became the mounting rails for the radio stack. I still have some labels to create, but it is all coming down to the airworthiness inspection scheduled for June 8, 2005.




Jerry K. Thorne
East Ridge, TN
RV-9A N2PZ
www.n2prise.org

Last edited by n2prise : 05-20-2005 at 07:02 AM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:32 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.