VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-19-2017, 09:11 AM
Draker Draker is offline
 
Join Date: Jun 2016
Location: Livermore, CA
Posts: 39
Question Alodine or primer for the tank attach countersinks

Started on my RV-7A wings recently and the first task is to drill those big ol' countersinks on the spar for the tank attach screws. The instructions say to prime the freely drilled aluminum which is what I've done, but I've seen build logs where builders are using alodine on them instead. Is there a big benefit to doing it this way, or just personal preference? Don't want to start a primer war if that's all it is. Just wondering if it's worth considering cleaning out the primer and applying alodine instead, which wouldn't take too long.

By the way, coming straight from the gentle hand-holding empennage instructions, the wings feel like boot camp: "Welcome to the wings. NOW DROP AND GIVE ME 150 NUTPLATES!"
Reply With Quote
  #2  
Old 04-21-2017, 06:48 AM
rv7charlie rv7charlie is offline
 
Join Date: May 2006
Location: Pocahontas MS
Posts: 1,827
Default

Alodine is technically lighter (though I doubt you could measure the difference there), and primer is a lot quicker & easier, unless you're using one of those one-step alodine pens to 'color' the places.

I certainly wouldn't change it if you've already primed.

If you think it's boot camp now, it will be a vaguely defined mission soon....

Charlie
Reply With Quote
  #3  
Old 04-21-2017, 07:32 AM
rapid_ascent rapid_ascent is offline
 
Join Date: Mar 2008
Location: Dublin, CA
Posts: 758
Default

It's much simpler to just mask and prime the area.
__________________
Ray Tonks
2016 Donation Paid
RV-7 Fuselage in progress
* Mid Fuselage Complete
* Aft Fuselage Complete
RV-7 SB Wings
* Both Wings fully skinned
* Fuel Tanks Complete - No leaks finally
* Ailerons Complete
* Flaps Complete
RV-7 Empennage - Complete (a little fiberglass work left)
Vans Training Kit # 2 - Complete
Shop Setup - In Progress (Gathering Tools, Never Complete)
RV-7 Preview Plans
Vans Training Kit #1 - Complete
EAA Sheet Metal Class - Complete
Reply With Quote
  #4  
Old 04-21-2017, 07:42 AM
Auburntsts's Avatar
Auburntsts Auburntsts is online now
 
Join Date: Jan 2005
Location: Dumfries, VA
Posts: 2,024
Default +1

Quote:
Originally Posted by rapid_ascent View Post
It's much simpler to just mask and prime the area.
This. I primed those CSKs and would do it that way again if I had to.
__________________
Todd Stovall
PP ASEL-IA
RV-10 N728TT - Grounded -- In for paint!!!
WAR EAGLE!
Reply With Quote
  #5  
Old 04-21-2017, 08:08 AM
jibby212 jibby212 is offline
 
Join Date: Oct 2014
Location: Sarasota Fl
Posts: 51
Default

Alodine pen and epoxy primer with a Q tip for me but I live on the coast of Florida so corrosion scares the **** out of me.
Reply With Quote
  #6  
Old 04-21-2017, 08:10 AM
wirejock's Avatar
wirejock wirejock is online now
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 2,565
Default Countersinks

Which do you have? Alodine pen, use it. Primer? Spray some in a paper cup and apply with a Q-tip.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/01/2016. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #7  
Old 04-21-2017, 02:05 PM
Draker Draker is offline
 
Join Date: Jun 2016
Location: Livermore, CA
Posts: 39
Default

Thanks for the advice, all. I did the "cup of primer + q-tip" method and will probably just leave it be.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:55 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.