VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-09-2017, 01:26 PM
asw20c asw20c is offline
 
Join Date: Jun 2010
Location: Edgewood, NM
Posts: 67
Default Elevator Hinges

So today I was going to final bolt-on the elevators but quickly realized there is no way to get my torque wrench inside the pockets, and since it only requires 28 in-lbs I'm a little concerned about over-torquing the nuts. Suggestions?
__________________
Empennage Complete Except for Tips
Starting Wings
Reply With Quote
  #2  
Old 04-09-2017, 02:51 PM
woodmanrog's Avatar
woodmanrog woodmanrog is offline
 
Join Date: May 2005
Location: Florida
Posts: 681
Default

Make sure that the elevators move freely and that at least 2 threads show through the end of the nuts. There should be no side to side play.
Reply With Quote
  #3  
Old 04-09-2017, 02:54 PM
rv7charlie rv7charlie is offline
 
Join Date: May 2006
Location: Pocahontas MS
Posts: 1,909
Default

You can do the math, using a regular wrench (maybe 6" long; 1/2 a foot) and a fish scale pulling on the end.

Or you can get a feel for the force needed by torquing the same size hardware while holding your torque wrench at the same distance out as a regular wrench, then torquing the actual hardware with a regular wrench. (more pragmatic solution)

Charlie
Reply With Quote
  #4  
Old 04-09-2017, 03:57 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 363
Default

I used a crows food wrench head (socket type). with extension and regular torque wrench.

Like this: https://www.amazon.com/Craftsman-pc-...+foot+wrenches
__________________
Turner Billingsley
RV-14A Fuselage in progress
https://turnerb14a.blogspot.com/
Reply With Quote
  #5  
Old 04-09-2017, 05:57 PM
MED MED is offline
 
Join Date: Jul 2015
Location: Aiken, SC
Posts: 104
Default

If you use a crow's foot wrench, be sure to compensate for the offset.

http://www.engineersedge.com/manufac...e_wrench_1.htm
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:43 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.