VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-24-2017, 10:26 AM
Av8rRob's Avatar
Av8rRob Av8rRob is offline
 
Join Date: May 2005
Posts: 179
Default A few tricks from section 29 I learned



The block of wood to support the fuselage on its side can be made from a 2" x 4" with two paint stir sticks stapled to it. Fits great.



Second, those tricky washers that get installed in the control column are 7/16" diameter. Make one of these out of scraps for easy way to install them.
__________________
Rob Lasater
Rv-14 emp/fuse done working on wings and finish
Paid dec 2017
Reply With Quote
  #2  
Old 03-24-2017, 01:19 PM
JohnInReno's Avatar
JohnInReno JohnInReno is offline
 
Join Date: Jun 2005
Location: Prescott Valley/Chandler AZ
Posts: 274
Default Tape

Add some tape to one side of the washer holder.
__________________
John Morgensen
RV-9A N946PM 500+ hours since 2013
Nevada/Arizona
Reply With Quote
  #3  
Old 03-24-2017, 01:35 PM
Driving '67 Driving '67 is offline
 
Join Date: Dec 2011
Location: Port Credit, ON Canada
Posts: 161
Default

Hi Rob,

Looking at your photo I think you might want to check page 28-11 figure 2 to confirm the orientation of F-01438 tab in relation to the F-01435 flange.

Cheers Jim
__________________
RV 14A wing/tail/fuselage done
Doing the avionics/wiring harnesses
G3X/GTN650/GTN625/GTX45R
Waiting for warm weather to do the canopy

Serial 140118
Reply With Quote
  #4  
Old 03-24-2017, 02:07 PM
Tom023 Tom023 is offline
 
Join Date: Jul 2011
Location: Cypress, TX
Posts: 212
Default

Quote:
Originally Posted by Driving '67 View Post
Hi Rob,

Looking at your photo I think you might want to check page 28-11 figure 2 to confirm the orientation of F-01438 tab in relation to the F-01435 flange.

Cheers Jim
Actually that drawing shows it as Rob has it, which is incorrect (p28-11 fig 2, rev 2). Maybe there is a corrected revision. . All the other drawings in the plans show it correctly. It's unfortunate the drawing on the page with the step is wrong. I initially installed mine per the drawings too but drilled out enough rivets to bend it under the tabs. It's a quick fix, 20 minutes a side.

Funny thing, I tried it both ways thinking it was made to go under but stuck to the plans drawing, LOL.
__________________
RV14A #140083
Wings, empennage, fuselage and finish slow builds completed
FWF and avionics in progress
2017 Donation

Last edited by Tom023 : 03-24-2017 at 02:30 PM.
Reply With Quote
  #5  
Old 03-24-2017, 02:08 PM
Driving '67 Driving '67 is offline
 
Join Date: Dec 2011
Location: Port Credit, ON Canada
Posts: 161
Default

That's also why I noticed. I had to go back and re-do one side while working on that section.I picked it up originally while reviewing Carl Bells and Tim Olsen websites one night.
Cheers Jim
__________________
RV 14A wing/tail/fuselage done
Doing the avionics/wiring harnesses
G3X/GTN650/GTN625/GTX45R
Waiting for warm weather to do the canopy

Serial 140118

Last edited by Driving '67 : 03-24-2017 at 08:33 PM.
Reply With Quote
  #6  
Old 03-24-2017, 05:22 PM
Av8rRob's Avatar
Av8rRob Av8rRob is offline
 
Join Date: May 2005
Posts: 179
Default

Thanks guys, I never noticed that small detail. Well there's something else to learn from this thread.
__________________
Rob Lasater
Rv-14 emp/fuse done working on wings and finish
Paid dec 2017
Reply With Quote
  #7  
Old 03-28-2017, 01:49 PM
Av8rRob's Avatar
Av8rRob Av8rRob is offline
 
Join Date: May 2005
Posts: 179
Default




Well I guess I just followed my plans after all?��

FYI, I have revision 2 dated 5/17/16 on page 28-11
__________________
Rob Lasater
Rv-14 emp/fuse done working on wings and finish
Paid dec 2017

Last edited by Av8rRob : 03-28-2017 at 01:57 PM.
Reply With Quote
  #8  
Old 03-28-2017, 07:55 PM
Av8rRob's Avatar
Av8rRob Av8rRob is offline
 
Join Date: May 2005
Posts: 179
Default

Well I spoke to Vans tech support about the correct way this part attaches. Apparently the most current drawings are incorrect. You guys with the older revisions have it correct ironically. That being said, they recommend I leave mine as it is and build on. Said it will make no difference. But this is good info for all the builders behind me to know the plans (rev2) are incorrect.
__________________
Rob Lasater
Rv-14 emp/fuse done working on wings and finish
Paid dec 2017
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:09 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.