Originally Posted by g3xpert
Simplified Fuel Flow Calibration
All of us have probably gone into configuration mode, done a little math, and made adjustments to our fuel flow calibration (K) factor to make the fuel totalizer more accurate.
This is significantly faster/easier now since you can do this after fill-up from the normal mode fuel calc engine page. Just press Menu on that page and select "Calibrate Fuel Flow" and a pop-up window will show you the fuel used and allow you to enter the actual fuel added to correct the calibration. In this example, the fuel totalizer measured 35 gals since our last fill-up, and we just added 33.5 gals to fill-up.
You can do this as often as you like until the desired accuracy is obtained.
Steve (g3x Expert et al):
Where is the new fuel flow calibration sequence in the pilot's manual or installation manual. I tried to look it up and I couldn't find it mentioned. I think it's really great and wanted to refer a fellow G3X Touch pilot to the official documentation.