I recently installed a set of leather seats from South Florida Sport Aviation and wanted to share my thoughts and results with everyone.
First off, I am in no way affiliated with SFSA other than a customer. I ordered my seats from their website and followed up with an email to Eliane to make sure the embroidered logo wouldn't be applied to my seats. Elaine and the staff there were great to make sure my request was followed. I did have to wait a few weeks longer than normal due to this being a custom order, which I was ok with. When I received the seats I was floored at the quality. The install process was very straight forward, even for someone with no upholstery skills. Let's face it, if you can build a plane, you can install these seats. Here are a few (big) pictures of the seats before I covered my front frames and just after I finished the install. The last few pictures show them in the plane after removing the wrinkles with a steamer.
I hope this brief write up helps others when looking for interiors. And thank you to everyone at SFSA for making this happen.
Here's a link to the album.