jeffw@sc47
Well Known Member
I will be installing a VP-X Pro in my RV14A and I'm well into the prep planning for it and the panel equipment.
The panel will have (left to right) a G5X, 10" GDU 465, center stack (top to bottom) GMC 307, GTN 650, GNC 255A (future), and GMA 245, plus right of stack a future G3X 7" portrait GDU 470. May be cutting back even more on initially installed panel equipment depending on taxes, etc.
But here's the 'I wanna' full layout.
QUESTION IS >> Where does the VP-X pro fit best in the space available behind the panel, where do I begin thinking about locating it?
The panel will have (left to right) a G5X, 10" GDU 465, center stack (top to bottom) GMC 307, GTN 650, GNC 255A (future), and GMA 245, plus right of stack a future G3X 7" portrait GDU 470. May be cutting back even more on initially installed panel equipment depending on taxes, etc.
But here's the 'I wanna' full layout.
QUESTION IS >> Where does the VP-X pro fit best in the space available behind the panel, where do I begin thinking about locating it?
Last edited: